Functional Windmill Heads
AWS0017: Functional Windmill Head
For those pond owners that have an existing tower (or need a replacement) and are interested in simply the windmill head then we offer the Outdoor Water Solutions functional windmill head. This comes with the complete head, blades, functional compressor, tail arms and tail fin. It also includes 100 ft. of airline and 1 airstone diffuser with a backflow valve.
The blade diameter on all units is a full 73 in. in diameter which is the largest windmill head on the market for pond aeration. This allows our units to pump up to 4.5 CFM of air and still turn at low wind speeds due to our windmill heads higher torque. We can also produce up to 30 psi of air allowing these units to aerate ponds or lakes that are 10 ft., 20 ft. or even 30 ft. deep.
The Outdoor Water Solutions Wind Driven Aeration System offers:
New BalCam II technology minimizes bearing fatigue with new Stainless Steel components
Patent pending new design
Fast & Easy Assembly
Manufactured with high quality 18 gauge galvanized steel
Newly redesigned blades and front dome assembly for better air flow
Self-governing head to protect the unit in high winds
New secure locking mechanism that attaches the windmill head to shaft
Larger check valves and upgraded 1/2 in. airline to handle the increased air that is produced
High Air Output - 3.0-4.5 CFM rating Rated at 30 psi
Full 5 year warranty on bearing’s and cam’s!
Ensure that your windmill tower can support approximately 200 lbs. Your tower will also need to be retrofitted to accept a 2.0 in. pivot tube that the Windmill Compressor is supported by.
AWS0298: Functional Windmill Head Powder Coated same as AWS0017 only powder coated
OMS0018: Ornamental Windmill Head
For those pond owners that have an existing tower and are interested in simply the windmill head then we offer the Outdoor Water Solutions ornamental windmill head. This comes with the complete head, blades, blank compressor, tail arms and tail fin. These are offered as a Galvanized unit.
Ensure that your windmill tower can support approximately 200 lbs. Your tower will also need to be retrofitted to accept a 2.0" pivot tube that the Windmill Compressor is supported by.
OMS0299: Ornamental Windmill Head Powder Coated same as OMS0018 only powder coated
